There are some 200 full-time work force employed at the manufacturing plant, and 22
of them are graduated from universities with engieering degrees. This manufacturing plant is composed of three main halls and also a fourth hall is
in construction close to the main hall.
-
Hall A:
The main activity carried out in this hall is to
breakdown copper wires of 1,38mm to 0.15, 0.25,
0.30, 0.40, 0.50 and 0.80mm through fine breakdown
machine. Then the wires are bunched together through
bunching machine. Insulating and finally providing
outer sheath is done by extrusion machines.
-
Hall B:
The mail hall is this hall with the use of drum
twister (Porteir France), in this hall laying up of
circular of size 4x16mm2 up to sector-shaped cables
of size 3x240+120mm2 is carried out. With the use of
strander 37, making cross-sections of up to300mm2 is
possible in this hall. These cables of big
cross-sections are then insulated and covered by
extruders.
-
Hall C: The Tubular
Watson (UK) is with its high production speed is used
for laying-up purposes. The USA braided in the saloon is
used for production of braided shield cables, which
together with the foam extruder, making possible
producing coaxial cables. A strander 18 is also
available in this hall.
|
